Saws Unlimited Inc.

Saws Unlimited Inc.

494 Bonnie Lane
Elk Grove Village, IL 60007
Toll Free: 866-714-1764
Local: 847-640-7450
Fax: 847-640-7464

HFA530 Super Bandsaw Machine

The phenomenal cutting rates will change the future

Specifications
Cutting Capacity	Round	Φ 1 1/4" to Φ 20 3/4"
Cutting Capacity	Square	Min.1 1/4" Max. 20 3/4"
Motor	Blade	10HP [15 HP]
	Hydraulic	5HP
	Voltage	AC 208V +/- 10% 3 PH 60Hz
	Power Requirement	220V = 60Amp [75Amp for optional motor]
Control Voltage		AC100V, DC24V
Blade Size (LxTxW)		262" x 0.063" x 2 5/8" [262" x 0.063" x 3 1/8"]
Blade Speed		49 to 394 SFPM (Invertor)
Vise	Type	Split Vise
	Cylinder	Hydraulic, Full Stroke(Zero damping possible)
	Material Positioning	Auto Initial Positioning (Standard)
Coolant Oil	Tank Capacity	52 gal.
Coolant Oil	Pump Type	Electric
Hydraulic Oil		10.4 gal.
Chip Disposal	Powered Blade Brush	Automatic Adjusting Double Wire Brushes (twin) PAT. P
Chip Disposal	Pump Type	Shaft-less Auger by Hydraulic motor

Blade Control	Quick Approach	Automatic
	Motion Detector	Standard
	Blade Break Detector	Standard
Feeding	Type	Shuttle vise
	Feed Stroke	15 3/4"
	Feed Length	0.39" to 393.69" ( By Multi-Index)
	Remnant Length	3.34"
Controlling Cut	Control Type	CNC-Light
	User Registration	Standard
	Blade Deviation Detection	Standard
Input Settings	Number of Categories	10 (9 Preset and 1 for Custom Entries)
	Number of Station	99 (Different size)
	Setting Amount	999
Table Height		32.67"
Work Load Capacity		8,610 lbs. (Feeding Capacity: 17,620 lbs.)
Machine Dimension (W x L x H)		118 3/4" x 73 1/2" x 77 1/2"
Machine Weight		13,215 lbs.

Note: [blue] specifications are for optional also with blue color in table where applicable.

LOWER CENTER OF GRAVITY FOR IMPROVED STABILITY

The weight of this machine is twice as heavy as most of the conventional machines of similar capacity. By setting the center of gravity lower, it paves the way for steady and stable performances.

LOW NOISE LEVELS

The unique design of the covers maintain the lowest noise levels possible, even when cutting tough materials at phenomenal cutting rates.

DOUBLE COLUMN GUIDANCE

The specially designed double column guidance system reduces vibration guarantees reliable performance.

SPECIAL MOTOR AND TRANSMISSION

The high-powered motor coupled special high efficiency transmission maintains high cutting rates even cutting the toughest materials.

HIGH RIGID SAW BLADE GUIDE

The automated tracking blade guide brings the blade support close to the material, and eliminates vibration at the cutting area.

USER-FRIENDLY OPERATOR CONSOLE

By simplifying required input data, the cutting rate controller (CNC Light) makes achieving maximum cutting rates, accuracies, and longer blade life a constant.

AUTOMATIC ADJUSTING DOUBLE WIRE BRUSHES

The new automatically adjusted double wire brush design assures keeping the chip area of the blade clean for maximum life of blade and brushes in all types of cutting.

MAXIMUM BLADE WIDTH

In order to enhance the performance of the special motor and transmission, this machine is equipped with a 2 5/8" blade with high beam strength (Optional 3 1/8" is available) for fast accurate cutting in all types of material.

| Coolants & Lubricants | Contact Us |