 |
 |
 |
 |
 |
 |
 |
 |
 |
| |
| Saws Unlimited Inc. |
494 Bonnie Lane
Elk Grove Village, IL 60007
Toll Free: 866-714-1764
Local: 847-640-7450
Fax: 847-640-7464 |
|
|
 |
|
| |
 |
 |
H-10A
H-10A "saw in the box" design was engineered to provide exceptional cutting performance, reliability and ease of use in a multi-shift high production environment! The new Rock Solid Solutions features a PLC controller with 99 job storage and Job queue function, heavy duty saw head 35 series linear bearing and weighs a Robust 3500 lb.
|
STANDARD FEATURES:
- 5 HP Motor with A/C Inverter
- 1 1/4" x 12'6" Blade
- Positive Down Feed System
- Stepper Driven Shuttle Vise with Ball Screw Mounted on Linear Rails with 24" Single Stroke (multi
- indexing)
- Out of Stock Switch
- Cast Iron Guide Arms supported by 2 Linear Bearings
- Replaceable Carbide Guide Inserts
- Split Front Vise
- Blade Breakage Switch
- Blade Brush
- Power Driven Chip Auger
- PLC Controls with 99 Job Storage and Job Queue function
- Halogen Works Light
- Flood Coolant System
- Wash Down Hose
|
OPTIONS:
- Variable Vise Pressure
- Full Capacity Overhead Bundling Clamp
- Mist System
- 5' & 10' Idler Conveyors
- Power Conveyors
|
Guide Arms
Heavy Duty Cast Iron Guide Arms, supported by Linear Bearing. The moveable guide arm is mechanically connected to the front vise movable jaw, moving it tandem with the vise, ensuring proper guide arm spacing, in relation to the application at all times.
 |
|
Hydraulic System
A Hydraulic system, featuring a Stainless Steel Tank, site gauge displays fluid level, and two easy access "clean up" plugs for enhanced serviceability. The H-10A Hydraulic system is conveniently located on a swing out door for easy access.
 |
|
Shuttle System
Mounted on linear bearings and powered by precision ball screw and servo motor achieving rapid shuttle movement with precise material positioning.
 |
|
|
| |
 |
|
H-14A
With it's design, the H-14A maintains is cost effective operation and user friendly features. The Mitsubishi PLC is conveniently located and controls the automatic cycles and allows for manual operation. Up to 999 different jobs can be entered into the PLC memory and the job queue function allows up to 10 jobs to be picked and run consecutively. This Rock Solid Solution is tough enough to operate in any high production environment!
|
STANDARD FEATURES:
- 7.5 HP Motor with A/C Inverter
- 1 1/4" x 15'4" Blade
- Mitsubishi PLC Controls 999 Jobs and 10 Job Queue Functions
- Shuttle Vise mounted on Linear Rails with 34" Single Stroke (multi-indexing)
- Cast Iron Guide Arms supported by 2 Linear Bearings
- Positive Down feed System
- Replaceable Carbide Guide Inserts
- Split Front Vise
- Blade Breakage Switch
- Blade Brush
- Hydraulic Chip Auger
- Halogen Work light
- Rood Coolant System
- Wash Down Hose
|
OPTIONS:
- Full Capacity Hydraulic Overhead Bundling
- Variable Vise Pressure
- Out of Stock Switch
- Vertical Rollers
- Mist System
- Blade Deviation Device
- 5' and 10' idler conveyors
|
Control Panel
Up to 999 different jobs can be entered into the PLC memory and can be recalled and performed at any time. A job queue function allows up to 10 jobs to run consecutively.
 |
|
Blade Wheels
19' high quality cast iron wheels with heavy duty wheel and gearbox shaft bearings.
 |
|
Shuttle System
A roller in feed table and linear bearing mounted shuttle vise assembly provide high speed material indexing of up to 34" in a single movement, with length accuracy of .005" per stroke.
 |
|
Variable Vise Pressure
This option provides vise pressure adjustment, on both vises, when thin wall tubing and other light materials are being cut. The feature minimizes the potential for deformation of the material.
 |
|
|
| |
 |
|
H-18A
The Best Cost Per Cut Performance in its Class!
|
STANDARD FEATURES:
- 10 HP motor
- 1 1/2" blade
- 34" shuttle stroke
- Split front vise
- Carbide guides
- Blade brush
- Hydraulic blade tensioning
- PLC Control
|
OPTIONS:
- Full capacity overhead bundle clamps
- Out of stock switch
- Vertical Rollers
- Variable vise pressure
- Mist Coolant System
|
Blade Tensioning
Hydraulic blade tension provides accurate, consistent and error free blade set up.
 |
|
Blade Drive
Powerful 10 HP/7.5 Kw blade motor is mounted directly on the gearbox, eliminating belts and pulleys.
 |
|
Split Front Vise
Clamps the material on both sides of the blade during cutting resulting in a more accurate and square cut. Also allows for shorter remnant piece.
 |
|
|
| |
 |
|
H-22A
Built Rock Solid, the Dual Post Horizontal Band Saws provide exceptional cutting performance on a wide range of applications. From mild steels and aluminums to stainless, tool steels and more exotic high temperature allows!
|
STANDARD FEATURES:
- 10 HP motor
- 2" blade
- 34" shuttle stroke
- Split front vise
- Hydraulic carbide guides
- Powered blade brush
- Hydraulic blade tensioning
- PLC Controls
|
OPTIONS:
- Full capacity overhead bundle clamp
- Out of Stock Switch
- Vertical Rollers
- Variable vise pressure
- 6° canted head
- 10' bar feed
- Mist coolant
|
HEX BUNDLE Clamps
Optional, Split vise "Hex" bundle clamps on both main vise and shuttle feed. Adjustable to accommodate a range of Hex bundle sizes.
 |
|
Canted Head
Optional 6° cant on head allows for less chip load resulting in longer blade life.
 |
|
Rack and Pinion Encoder
Easily set the cut length via the PLC control on the control console.
 |
|
Linear Bearings
Hyd-Mech uses linear bearings and hydraulic cylinders to support the machine head. Heat treated and lubricated eliminating any slippage or sticking while in operation and reduces head vibration.
 |
|
Large Band Wheels
Constructed from heavy cast iron the band wheels are recessed creating less blade twist resulting in longer blade life.
 |
|
Robust Guide Arms
Heavy Duty cast iron power guide arms equipped with hydraulics carbide guides, adjust to clamp width providing optimum beam and extending blade lite.
 |
|
User Friendly Controls
Ergonomically located at easy operating height. All controls and functions clearly labeled to operate machine in either Automatic or Manual mode. Includes Feed Rate and Cutting Pressure Dials. Fast Approach lever and Emergency Stop Button.
 |
|
Robust Gearbox
Controlled by an AC inverter drive allowing for a large of band speeds. An LED displays the band speed on the control panel.
 |
|
Hydraulic System
Controls both main and shuttle vise, saw stroke and blade lesioning. Easy view system pressure monitor with swing out compartment door.
 |
|
Operator Instructions
Readily visible in front of the control panel. Operator friendly step to step cutting instructions (available in French, Spanish and other languages upon request). Resulting in quick set up times and more production output.
 |
|
|
H Series
|
| H Series |
Specifications |
H-10 |
H-14A |
H-18A |
H-22A |
| Capacity |
Rectangular |
10' x 10' |
254mm x 254mm |
14' x 14' |
356mm x 356mm |
18' x 18' |
457mm x 457mm |
22' x 22' |
559mm x 559mm |
| Round |
10' |
254mm |
14' |
356mm |
18' |
457mm |
22' |
559mm |
| Blade |
Blade Dimensions |
12'6'
1 1/4" |
3810mm
32mm |
15'4'
1 1/2" |
4674mm
32mm |
19'2'
1 1/2" |
5842mm
38mm |
22'6'
2" |
6858mm
51mm |
| Blade Drive |
5 hp |
3.7 kW |
7.5 hp |
5.5 kW |
10 hp |
7.5 kW |
10 hp |
7.5 kW |
| Blade Wheel Diameter |
16' |
406mm |
19' |
483mm |
22' |
559mm |
27' |
686mm |
| Blade Speed |
50-350 SFM |
15-107 m/min |
50-350 SFM |
15-107 m/min |
50-350 SFM |
15-107 m/min |
40-300 SFM |
12-92 m/min |
| Overall |
Shuttle Stroke |
0-24' |
0-610mm |
0-34' |
0-864mm |
0-34' |
0-864mm |
0-34' |
0-864mm |
| Hydraulic Drive |
1 hp |
0.75 kW |
2 hp |
1.5 kW |
3 hp |
2.25 kW |
3 hp |
2.25 kW |
| Coolant Tank Capacity |
7 US Gal |
25 litres |
25 US Gal |
95 litres |
30 US Gal |
114 litres |
30 US Gal |
114 litres |
| Table Height |
31" |
787mm |
31" |
787mm |
31" |
787mm |
31" |
787mm |
| Machines Weight |
3500 lbs |
1588 kg |
4700 lbs |
2132 kg |
8500 lbs |
3856 kg |
12500 lbs |
5670 kg |
| Machine Dimentions |
Width
Length
Height |
83'
68'
67' |
2108mm
1726mm
1701mm |
94'
81'
74' |
2388mm
2057mm
1880mm |
127'
88'
92' |
3226mm
2235mm
2337mm |
141'
88'
92' |
3581mm
2235mm
2337mm |
|
|
|
|
