Saws Unlimited Inc.

Saws Unlimited Inc.

494 Bonnie Lane
Elk Grove Village, IL 60007
Toll Free: 866-714-1764
Local: 847-640-7450
Fax: 847-640-7464

View by Page No.

Solid Material

Carbon Steel and Bimetal Bandsaw Blades				TCT Bandsaw Blades
Standard Toothing		Vario Toothing		Vario Toothing
Cross section	Toothing	Cross section	Toothing	Cross section	Toothing
bis-10 mm	14 tpi	bis-25 mm	10/14 tpi	50-120 mm	3/4 tpi
10-30 mm	10 tpi	15-40 mm	8/12 tpi	100-250 mm	2/3 tpi
30-50 mm	8 tpi	25-50 mm	6/10 tpi	150-400 mm	1,5/2 tpi
50-80 mm	6 tpi	35-70 mm	5/8 tpi	350-600 mm	1,1/1,6 tpi
80-120 mm	4 tpi	40-90 mm	5/6 tpi	>500 mm	0,85/1,15 tpi
120-200 mm	3 tpi	50-120 mm	4/6 tpi
200-400 mm	2 tpi	80-180 mm	3/4 tpi
300-700 mm	1,25 tpi	130-350 mm	2/3 tpi
> 600 mm	0,75 tpi	150-450 mm	1,5/2 tpi
		200-600 mm	1,1/1,6 tpi
		>500 mm	0,75/1,25 tpi

Advice

For permanent mixed cutting with cross sections between 50-150 mm of solid materials we also recommend our new vario toothing 4/5 tpi as an alternative of changing blades between 4/6 and 3/4 tpi.

Please select positive cutting angle (K,D,M or R) depending on blade quality.

For cutting stainless steel and aluminum, we recommend choosing the toothing one grade coarser or using less than the maximum cross section width indicated.

For tempered materials (>1200N/mm2), please choose the toothing one grade finer.

For cutting aluminum and non-ferrous metals we also offer special toothings e.g. 3 tpi aluminum.

Tubes

Wall thickness S (mm)	Outside diameter D(mm) Toothing Z(tpi)
	20	40	60	80	100	120	150	200	300	500
2	14	10/14	10/14	10/14	10/14	8/12	8/12	8/12	8/12	5/8
3	14	10/14	10/14	8/12	8/12	8/12	8/12	6/10	6/10	5/8
4	10/14	10/14	8/12	8/12	8/12	6/10	6/10	5/8	5/8	4/6 S
5	10/14	10/14	8/12	8/12	6/10	6/10	5/8	4/6 S	4/6 S	4/6 S
6	10/14	8/12	8/12	6/10	6/10	5/8	5/8	4/6 S	4/6 S	4/6 S
8	10/14	8/12	8/12	6/10	5/8	5/8	4/6	4/6	4/6	4/6
10		8/12	6/10	5/8	4/6	4/6	4/6	4/6	4/6	4/5
12		8/12	6/10	4/6	4/6	4/6	4/6	4/6	4/6	4/5
15		8/12	6/10	4/6	4/6	4/6	4/6	4/5	4/5	4/5
20			4/6	4/6	4/6	4/6	4/6	4/5	4/5	3/4
30				4/6	4/6	4/5	4/5	4/5	4/5	2/3
50							4/5	3/4	2/3	2/3
80								3/4	2/3	2/3
>100									2/3	1,5/2

| Coolants & Lubricants | Contact Us |